This stretch sleeve applicator is our fastest linear machine.
The rythm on exit of the machine is high, up to 120 cycles/mn but
as two subassemblies work each after the other, they actually run
at 50 % of the real speed.
When a pair of stretchers descends the sleeve, the other pair
rises to catch the next one.
This is of great interest because it lowers tremendously the wear
and maintenance of each subassembly.
Conceived from the very beginning to sleeve empty products at low speed, from 1 up to 15 litres:
1. Located on the line after the blow molding, it captures the products and transfers them onto the sleeving table
2. The transferring carriage lowers, stretches the film and places it on the product which is then conveyed back on to the line
3. Primarily air powered, this machine is intended for 15 cycles/mn
1. This stretch sleeve applicator handles the products in line and stops them under the head.
2. Then the mandrel opens the sleeve, 4 clamping grippers stretch it before application onto the product.
3. The product is then released and the cycle starts again.
4. Decoration and bundling are possible with the same machine.
5. Production speed up to 50 ppm.
